| Trade Mark | Volatile Matter (% Max) |
Metallic Content (% Min) |
Density (gm/cc) | Average Particle Size (in microns) – By Cilas 920 (Typical) |
Sieve Analysis (use water as rinsing liquid) |
Specific Surface area / Blaines Value ( cm2/gm ) Typical |
Gas Reactivity test with 40ml of 30 % Ca(OH)2 solution with 0.07 gm of Aluminium Powder @30°C |
Water Miscibility | MSDS | |
|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns (% Max) |
Passing through 45 microns (%) |
|||||||||
| IS 438-2006 | IS 438-2006 | ASTM B 417 – 00 (2006) | ASTM B822-02 | ISO-1247 | ISO-1247 | ASTM C204 – 07 | In-house test method | |||
| Conc 40 | 0.5 | 94 | 0.12 – 0.17 | 50 | 3.0% | 30-50% | 9000 | 65 ml of gas evolution with in 16 minutes | 100% | |
| Conc 50 | 0.5 | 93 | 0.12 – 0.17 | 45 | 2.0% | 50-60% | 10000 | 100% | ||
| Conc 60 | 0.5 | 92 | 0.12 – 0.17 | 30 | 1.5% | 60-70% | 12000 | 100% | ||
| Conc 75 | 0.5 | 91 | 0.12 – 0.18 | 25 | 1.5% | 65-75% | 12000 | 100% | ||
| Conc 80 | 0.5 | 91 | 0.12 – 0.18 | 25 | 1.0% | 70-80% | 12000 | 100% | ||
| Conc 85 | 0.5 | 90 | 0.12 – 0.18 | 18 | 0.5% | >80% | 15000 | 100% | ||
| Conc 95 | 0.5 | 89 | 0.13 – 0.20 | 15 | 0.5% | >88% | 16000 | 100% | ||
| Trade Mark | Non Volatile Content % | Solvent (Diethylene Glycol – DEG) | Average Particle Size (Typical) Cilas 920 in microns | Sieve Analysis (use water as rinsing liquid) | Water Miscibility | Applications | MSDS |
|---|---|---|---|---|---|---|---|
| Passing through 45 microns | |||||||
| IS 289-1963 | ASTM B822-02 | ISO-1247 | |||||
| Conc 40 Paste | 70 / 80 % | 30 / 20 % | 55 | 45 – 55 % | 100% | For the Manufacture of AAC Blocks | |
| Conc 50 Paste | 70 / 80 % | 30 / 20 % | 50 | 55 – 65 % | 100% | For the Manufacture of AAC Blocks | |
| Conc 60 Paste | 70 / 80 % | 30 / 20 % | 45 | 65 – 75 % | 100% | For the Manufacture of AAC Blocks/ Slabs | |
| Conc 75 Paste | 70 / 80 % | 30 / 20 % | 35 | 75 – 85 % | 100% | For the Manufacture of AAC Blocks/ Slabs | |
| Conc 95M Paste | 70 / 80 % | 30 / 20 % | 25 | 80 – 90 % | 100% | For the Manufacture of AAC Slabs |
Packing
- 440 mm dia X 660 mm height ms drum with full open mouth with locking ring
- 200 liters capacity new MS Barrels
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter (% Max) |
Metallic Content (% Min) |
Density (gm/cc) | Average Particle Size (Typical) Cilas 920 in microns | Sieve Analysis (use water as rinsing liquid) | Specific Surface area (Blaine Value) Typical cm2/gm (min) | Gas Reactivity test with Ca(OH)2 for 0.07 gm of Aluminium Powder (min) | Water Miscibility | MSDS | |
|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | |||||||||
| IS 438-2006 | IS 438-2006 | ASTM B 417 – 00 (2006) | ASTM B822-02 | ISO-1247 | ISO-1247 | ASTM C204 – 07 | In-house test method | |||
| Conc 60 | 0.5 | 92 | 0.12 – 0.17 | 30 | 2% (max) | 60 – 70 % | 12000 | 65 ml of gas evolution with in 16 minutes | 100% | |
| Conc 75 | 0.5 | 91 | 0.12 – 0.18 | 30 | 2% (max) | 65 – 75 % | 12000 | 100% | ||
| Conc 80 | 0.5 | 91 | 0.12 – 0.18 | 25 | 2% (max) | 70 – 80 % | 12000 | 100% | ||
| Conc 85 | 0.5 | 90 | 0.12 – 0.18 | 18 | 1% (max) | > 80% | 15000 | 100% | ||
| Conc 95 | 0.5 | 89 | 0.13 – 0.20 | 15 | 1% (max) | > 88% | 16000 | 100% | ||
| Trade Mark | Non Volatile Content % | Solvent (Diethylene Glycol – DEG) | Average Particle Size (Typical) Cilas 920 in microns | Sieve Analysis (use water as rinsing liquid) | Water Miscibility | Applications | MSDS |
|---|---|---|---|---|---|---|---|
| Passing through 45 microns | |||||||
| IS 289-1963 | ASTM B822-02 | ISO-1247 | |||||
| Conc 60 Paste | 70 / 80 % | 30 / 20 % | 45 | 65 – 75 % | 100% | For the Manufacture of AAC Blocks/ Slabs | |
| Conc 75 Paste | 70 / 80 % | 30 / 20 % | 35 | 75 – 85 % | 100% | For the Manufacture of AAC Blocks/ Slabs | |
| Conc 95M Paste | 70 / 80 % | 30 / 20 % | 25 | 80 – 90 % | 100% | For the Manufacture of AAC Slabs | |
| Conc 95 Paste | 70 / 80 % | 30 / 20 % | < 20 | 90 % | 100% | For the Manufacture of AAC Slabs |
Packing
- 440 mm dia X 660 mm height ms drum with full open mouth with locking ring
- 200 liters capacity new MS Barrels
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content (% Max) | Water Covering Area (cm2/gm Min) | Wet Sieve (% Min) | Leafing Value (% Min) | Typical Average Particle Size (microns) – By Cilas 920 | Solvent | Applications | MSDS | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns |
Passing through 45 microns |
||||||||||||||
| IS 289 | ISO 1247 | ||||||||||||||
| M30L | 64 | 27000 | 100 | 99 | 65 | 6 | M.T.O. |
|
|||||||
| N30L | Naptha |
|
|||||||||||||
| T30L | Toluene |
|
|||||||||||||
| X30L | Xylene |
|
|||||||||||||
| M35L | 64 | 35000 | 100 | 99.5 | 65 | 5 | M.T.O. |
|
|||||||
| N35L | Naptha |
|
|||||||||||||
| T35L | Toluene |
|
|||||||||||||
| X35L | Xylene |
|
|||||||||||||
Packing
- 440 mm dia X 660 mm height ms drum with full open mouth with locking ring
- 200 liters capacity new MS Barrels
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter (% Max) | Fatty Acid (% Max) | Metallic Aluminium ( % Min) | Apparent Density (gm/cc) | Water Covering Area (cm2/gm Min) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catching | Spreading (Seconds) | Glowing (Seconds) | |||||||||
| IS 438-2006 | ASTM B 417 – 00 (2006) / IS 10441-1982 | IS 438-2006 | ISO-1247 | In-House Procedure | |||||||||
| PHOS 50 | 0.5 | Customer Specification | 94 | Customer Specification | Customer Specification | Customer Specification | Customer Specification | Nil | Nil | Nil | Customer Specification | Pesticides | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content (% Max) | Water Covering Area (cm2/gm Min) | Wet Sieve (% Min) | Leafing Value (% Min) | Typical Average Particle Size (microns) – By Cilas 920 | Solvent | Applications | MSDS | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns |
Passing through 45 microns |
||||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||||
| M20L | 65 | 19000 | 99 | 97 | 75 | 13 | M.T.O. |
|
|||||
| N20L | Naptha |
|
|||||||||||
| T20L | Toluene |
|
|||||||||||
| X20L | Xylene |
|
|||||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter (% Max) | Fatty Acid (% Max) | Metallic Aluminium % (Min) | Apparent Density gm/cc | Water Covering Area cm2/gm (minimum) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catching | Spreading (Seconds) | Glowing (Seconds) | |||||||||
| IS 438-2006 | ASTM B 417 – 00 (2006)/ IS 10441-1982 | IS 438-2006 | ISO-1247 | In-House Procedure | |||||||||
| PYRO 100 | 0.5 | 2 | 75 | 0.40 – 0.50 | Nil | Nil | 98% | Fast | 15 – 20 | 20 – 30 | 50 | Heavy Crackers | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Content ( % min ) |
Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 20 | 99.7 | 10% max | 50 – 70 % | 10 – 35 % | 5 % max | Fero Alloys, Brake Linings and Thermit Welding | |
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content (% Max) | Water Covering Area (cm2/gm Min) | Wet Sieve (% Min) | Leafing Value (% Min) | Typical Average Particle Size (microns) – By Cilas 920 | Solvent | Applications | MSDS | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns |
Passing through 45 microns |
||||||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||||||
| M30L | 64 | 27000 | 100 | 99 | 65 | 6 | M.T.O. |
|
|||||||
| N30L | Naptha |
|
|||||||||||||
| T30L | Toluene |
|
|||||||||||||
| X30L | Xylene |
|
|||||||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content (%Max) | Wet Sieve (% Min) | Typical Average Particle Size (microns) – By Cilas 920 | Solvent | Applications | MSDS | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||
| M20N | 65 | 99 | 97 | 13 | M.T.O. |
|
|||||
| N20N | Naptha |
|
|||||||||
| T20N | Toluene |
|
|||||||||
| X20N | Xylene |
|
|||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Content ( % min ) |
Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 50 | 99.7 | NIL | 10% max | Remainder | 30% min | Welding Electrodes, Foundry Fluxes, Chemical and Soldering Applications | |
| AP 60 | 99.7 | NIL | 5% max | Remainder | 50% min | ||
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Content ( % min ) |
Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 50 | 99.7 | NIL | 10% max | Remainder | 30% min | Welding Electrodes, Foundry Fluxes, Chemical and Soldering Applications | |
| AP 60 | 99.7 | NIL | 5% max | Remainder | 50% min | ||
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content (% Max) | Water Covering Area (cm2/gm Min) | Wet Sieve (% Min) | Leafing Value (% Min) | Typical Average Particle Size (microns) – By Cilas 920 | Solvent | Applications | MSDS | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns |
Passing through 45 microns |
||||||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||||||
| M30L | 64 | 27000 | 100 | 99 | 65 | 6 | M.T.O. |
|
|||||||
| N30L | Naptha |
|
|||||||||||||
| T30L | Toluene |
|
|||||||||||||
| X30L | Xylene |
|
|||||||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content (%Max) | Wet Sieve (% Min) | Typical Average Particle Size (microns) – By Cilas 920 | Solvent | Applications | MSDS | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||
| M20N | 65 | 99 | 97 | 13 | M.T.O. |
|
|||||
| N20N | Naptha |
|
|||||||||
| T20N | Toluene |
|
|||||||||
| X20N | Xylene |
|
|||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter (% Max) | Fatty Acid (% Max) | Metallic Aluminium % (Min) | Apparent Density gm/cc | Water Covering Area cm2/gm (minimum) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catching | Spreading (Seconds) | Glowing (Seconds) | |||||||||
| IS 438-2006 | ASTM B 417 – 00 (2006) / IS 10441-1982 | IS 438-2006 | ISO-1247 | In-House Procedure | |||||||||
| PYRO 60 | 0.5 | 2 | 88 | 0.10 – 0.15 | 7000 | 1% | 65% | Fast | 30 – 35 | 10 – 20 | 30 | Wheels | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter (% Max) | Fatty Acid (% Max) | Metallic Aluminium ( % Min) | Apparent Density (gm/cc) | Water Covering Area (cm2/gm Min) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catch | Spread ( Seconds) |
Glow ( Seconds) |
|||||||||
| IS 438-2006 | ASTM B 417 – 00 (2006) / IS 10441-1982 | IS 438-2006 | ISO-1247 | In-House Procedure | |||||||||
| PYRO 90 | 0.5 | 2 | 80 | 0.15 – 0.22 | 6000 | Nil | 85% | Fast | 20 – 30 | 10 – 20 | 40 | Crackers | |
| PYRO 90LD | 0.5 | 2 | 80 | 0.10 – 0.16 | 6500 | Nil | 80% | Fast | 20 – 30 | 10 – 20 | 35 | Crackers | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Content ( % min ) |
Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 80 | 99.7 | NIL | NIL | 3% Max | 85% min | Refractory Industries, Solid Propellant Fuels, Epoxy & Vinyl Adhesives. | |
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Content ( % min ) |
Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 20 | 99.7 | 10% max | 50 – 70 % | 10 – 35 % | 5 % max | Fero Alloys, Brake Linings and Thermit Welding | |
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter % (maximum) | Fatty Acid % (Max) | Metallic Aluminium % (Min) | Apparent Density gm / cc | Water Covering Area cm2/gm (Min) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catching | Spreading (Seconds) | Glowing (Seconds) | |||||||||
| IS 438-2006 | ASTM B 417 – 00 (2006) / IS 10441-1982 | IS 438-2006 | ISO-1247 | In-House Procedure | |||||||||
| PYRO 40 | 0.5 | 1 | 92 | 0.15 – 0.23 | 3500 | 2% | 30% | Slow | Nil | Nil | 35 | Flower Pots | |
| PYRO 40LD | 0.5 | 1 | 90 | 0.11 – 0.16 | 4000 | 2% | 30% | Slow | Nil | Nil | 30 | Flower Pots | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Purity % min | Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 50 | 99.7 | NIL | 10% max | Remainder | 30% min | Welding Electrodes, Foundry Fluxes, Chemical and Soldering Applications | |
| AP 60 | 99.7 | NIL | 5% max | Remainder | 50% min | ||
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags / 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content % (Max) | Water Covering Area cm2/gm (Min) | Wet Sieve (% Min) | Leafing Value % (Min) | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||||
| M20L | 65 | 19000 | 99 | 97 | 75 | 13 | M.T.O. |
|
|||||
| N20L | Naptha |
|
|||||||||||
| T20L | Toluene |
|
|||||||||||
| X20L | Xylene |
|
|||||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content % (Max) | Wet Sieve (% Min) | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||
| IS 289 | ISO 1247 | ||||||||||
| M30N | 64 | 100 | 99 | 6 | M.T.O. |
|
|||||
| N30N | Naptha |
|
|||||||||
| T30N | Toluene |
|
|||||||||
| X30N | Xylene |
|
|||||||||
| M35N | 64 | 100 | 99.5 | 5 | M.T.O. |
|
|||||
| N35N | Naptha |
|
|||||||||
| T35N | Toluene |
|
|||||||||
| X35N | Xylene |
|
|||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content % (Max) | Wet Sieve (% Min) | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||
| M15N | 65 | 97 | 90 | 15 | M.T.O. |
|
|||||
| N15N | Naptha |
|
|||||||||
| T15N | Toluene |
|
|||||||||
| X15N | Xylene |
|
|||||||||
| M20N | 65 | 99 | 97 | 13 | M.T.O. |
|
|||||
| N20N | Naptha |
|
|||||||||
| T20N | Toluene |
|
|||||||||
| X20N | Xylene |
|
|||||||||
| M30N | 64 | 100 | 99 | 6 | M.T.O. |
|
|||||
| N30N | Naptha |
|
|||||||||
| T30N | Toluene |
|
|||||||||
| X30N | Xylene |
|
|||||||||
| M35N | 64 | 100 | 99.5 | 5 | M.T.O. |
|
|||||
| N35N | Naptha |
|
|||||||||
| T35N | Toluene |
|
|||||||||
| X35N | Xylene |
|
|||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter % (Max) | Fatty Acid % (Max) | Metallic Aluminium % (Min) | Apparent Density (gm/cc) | Water Covering Area cm2/gm (Min) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catching | Spreading (Seconds) | Glowing (Seconds) | |||||||||
| IS 438 | ASTM B 417 | IS 438 | ISO-1247 | In-House Procedure | |||||||||
| PYRO 100 | 0.5 | 2 | 75 | 0.40 – 0.50 | Nil | Nil | 98% | Fast | 15 – 30 | 20 – 30 | 50 | Heavy Crackers | |
| PYRO 95 | 0.5 | 2 | 80 | 0.22 – 0.27 | 5000 | Nil | 88% | Fast | 20 – 30 | 10 – 20 | 50 | Heavy Crackers | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content % (Max) | Water Covering Area cm2/gm (Min) | Wet Sieve (% Min) | Leafing Value (% Min) | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||||||
| M20L | 65 | 19000 | 99 | 97 | 75 | 8 | M.T.O. |
|
|||||||
| N20L | Naptha |
|
|||||||||||||
| T20L | Toluene |
|
|||||||||||||
| X20L | Xylene |
|
|||||||||||||
| M30L | 64 | 27000 | 100 | 99 | 65 | 6 | M.T.O. |
|
|||||||
| N30L | Naptha |
|
|||||||||||||
| T30L | Toluene |
|
|||||||||||||
| X30L | Xylene |
|
|||||||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content % (Max) | Wet Sieve (% Min) | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||
| IS 289 | ISO 1247 | ||||||||||
| M20N | 65 | 99 | 97 | 13 | M.T.O. |
|
|||||
| N20N | Naptha |
|
|||||||||
| T20N | Toluene |
|
|||||||||
| X20N | Xylene |
|
|||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content % (Max) | Wet Sieve (% Min) | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |
|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||
| IS 289-1963 | ISO 1247 | ||||||
| M15N | 65 | 97 | 90 | 15 | M.T.O. |
|
|
| N15N | Naptha |
|
|||||
| T15N | Toluene |
|
|||||
| X15N | Xylene |
|
|||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content % (max) | Wet Sieve (% Min) | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||
| M30N | 64 | 100 | 99 | 6 | M.T.O. |
|
|||||
| N30N | Naptha |
|
|||||||||
| T30N | Toluene |
|
|||||||||
| X30N | Xylene |
|
|||||||||
| M35N | 64 | 100 | 99.5 | 5 | M.T.O. |
|
|||||
| N35N | Naptha |
|
|||||||||
| T35N | Toluene |
|
|||||||||
| X35N | Xylene |
|
|||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content % (Max) | Water Covering Area cm2/gm (Min) | Wet Sieve | Leafing Value % (Min) | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||||||
| M30L | 64 | 27000 | 100 | 99 | 65 | 6 | M.T.O. |
|
|||||||
| N30L | Naptha |
|
|||||||||||||
| T30L | Toluene |
|
|||||||||||||
| X30L | Xylene |
|
|||||||||||||
| M35L | 64 | 35000 | 100 | 99.5 | 65 | 5 | M.T.O. |
|
|||||||
| N35L | Naptha |
|
|||||||||||||
| T35L | Toluene |
|
|||||||||||||
| X35L | Xylene |
|
|||||||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter % (Max) | Fatty Acid % (Max) | Metallic Aluminium % (Min) | Apparent Density gm/cc | Water Covering Area cm2/gm (Min) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catching | Spreading (Seconds) | Glowing (Seconds) | |||||||||
| IS 438-2006 | ASTM B 417 – 00 (2006) / IS 10441-1982 | IS 438-2006 | ISO-1247 | In-House Procedure | |||||||||
| PYRO 60 | 0.5 | 2 | 88 | 0.10 – 0.15 | 7000 | 1% | 65% | Fast | 30 – 35 | 10 – 20 | 30 | Wheels | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content (% Max) | Water Covering Area cm2/gm (Min) | Wet Sieve (% Min) | Leafing Value % (Min) | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||||||
| M30L | 64 | 27000 | 100 | 99 | 65 | 6 | M.T.O. |
|
|||||||
| N30L | Naptha |
|
|||||||||||||
| T30L | Toluene |
|
|||||||||||||
| X30L | Xylene |
|
|||||||||||||
| M35L | 64 | 35000 | 100 | 99.5 | 65 | 5 | M.T.O. |
|
|||||||
| N35L | Naptha |
|
|||||||||||||
| T35L | Toluene |
|
|||||||||||||
| X35L | Xylene |
|
|||||||||||||
Packing
- 440 mm dia X 660 mm height ms drum with full open mouth with locking ring
- 200 liters capacity new MS Barrels
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Non-Volatile Content % (Max) | Wet Sieve | Average Particle Size (microns) Cilas 920 | Solvent | Applications | MSDS | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Passing through 75 microns | Passing through 45 microns | ||||||||||
| IS 289-1963 | ISO 1247 | ||||||||||
| M30N | 64 | 100 | 99 | 6 | M.T.O. |
|
|||||
| N30N | Naptha |
|
|||||||||
| T30N | Toluene |
|
|||||||||
| X30N | Xylene |
|
|||||||||
| M35N | 64 | 100 | 99.5 | 5 | M.T.O. |
|
|||||
| N35N | Naptha |
|
|||||||||
| T35N | Toluene |
|
|||||||||
| X35N | Xylene |
|
|||||||||
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Purity % (Min) | Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 80 | 99.7 | NIL | NIL | 3% Max | 85% min | Refractory Industries, Solid Propellant Fuels, Epoxy & Vinyl Adhesives. | |
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Content ( % min ) |
Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 50 | 99.7 | NIL | 10% max | Remainder | 30% min | Welding Electrodes, Foundry Fluxes, Chemical and Soldering Applications | |
| AP 60 | 99.7 | NIL | 5% max | Remainder | 50% min | ||
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Content ( % min ) |
Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 80 | 99.7 | NIL | 3% max | Remainder | 50% min | Refractory Industries, Solid Propellant Fuels, Epoxy & Vinyl Adhesives. | |
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter % (Max) | Fatty Acid % (Max) | Metallic Aluminium % (Min) | Apparent Density gm/cc | Water Covering Area cm2/gm (Min) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catching | Spreading (Seconds) | Glowing (Seconds) | |||||||||
| IS 438 | ASTM B 417 | IS 438 | ISO-1247 | In-House Procedure | |||||||||
| PYRO 90 | 0.5 | 2 | 80 | 0.15 – 0.22 | 6000 | Nil | 85% | Fast | 20 – 30 | 10 – 20 | 40 | Crackers | |
| PYRO 80 | 0.5 | 4 | 80 | 0.15 – 0.25 | 10000 | Nil | 85% | Fast | 20 – 30 | 10 – 20 | 40 | Sparklers | |
| PYRO 60 | 0.5 | 2 | 88 | 0.10 – 0.15 | 7000 | 1% | 65% | Fast | 30 – 35 | 10 – 20 | 30 | Wheels | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Purity % min | Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 20 | 99.7 | 10% max | 50 – 70 % | 10 – 35 % | 5 % max | Fero Alloys, Brake Linings and Thermit Welding | |
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter % (Max) | Fatty Acid % (Max) | Metallic Aluminium % (Min) | Apparent Density gm/cc | Water Covering Area cm2/gm (Min) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catching | Spreading (Seconds) | Glowing (Seconds) | |||||||||
| IS 438-2006 | ASTM B 417 – 00 (2006)/ IS 10441-1982 | IS 438-2006 | ISO-1247 | In-House Procedure | |||||||||
| PYRO 60 | 0.5 | 2 | 88 | 0.10 – 0.15 | 7000 | 1% | 65% | Fast | 30 – 35 | 10 – 20 | 30 | Wheels | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Aluminium Purity % min | Sieve Analysis | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|
| Retention on 425 microns | Retention on 150 microns | Retention on 75 microns | Passing on 45 microns | ||||
| 40 ASTM Mesh | 100 ASTM Mesh | 200 ASTM Mesh | 325 ASTM Mesh | ||||
| Atomic Absorption Spectro Photometer | ASTM B214-07, Particle Size Distributioon – Cilas 920 – ASTM B 822 – 02 (laser granulometry) | ||||||
| AP 50 | 99.7 | Nil | 10% max | Remainder | 30% min | ||
| AP 60 | 99.7 | Nil | 5% max | Remainder | 50% min | Welding Electrodes, Foundry Fluxes, Chemical and Soldering Applications | |
Packing
- 50 Kgs in polythene lined tar coated Hessian Bags/ 1250 Kgs net Jumbo Bags.
* We can also Supply as per Customer’s Specifications on request
| Trade Mark | Volatile Matter % (Max) | Fatty Acid % (Max) | Metallic Aluminium % (Min) | Apparent Density gm/cc | Water Covering Area cm2/gm (Min) | Typical Sieve Analysis | Burning Property | Standard Packing (Kgs) | Applications | MSDS | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Retained on 180 microns | Passing through 45 microns | Catching | Spreading (Seconds) | Glowing (Seconds) | |||||||||
| IS 438-2006 | ASTM B 417 – 00 (2006)/ IS 10441-1982 | IS 438-2006 | ISO-1247 | In-House Procedure | |||||||||
| PYRO 60 | 0.5 | 2 | 88 | 0.10 – 0.15 | 7000 | 1% | 65% | Fast | 30 – 35 | 10 – 20 | 30 | Wheels | |
Packing
- 440 mm dia X 400 mm height with full open mouth with locking ring
- 440 mm dia X 660 mm height with 7″ dia mouth, inner lid and outer capseals.
* We can also Supply as per Customer’s Specifications on request